Ipod Operation - Akai ASB70I Operator's Manual

Choosing the Correct Adaptor
When connecting an iPod to this iPod Dock, please ensure that the
correct adapter plate is used. FAILURE TO DO SO MAY RESULT
IN DAMAGE TO THE IPOD.
This iPod Dock comes with 6 removable dock adaptors. Using the correct adaptor ensures the
proper fit for your iPod and helps to reduce the stress on the connector when operating the iPod.
NOTE: The adaptor for iPod nano is already installed in the dock.
To place a dock adaptor:
1. Refer to the compatibility table on the next page and select
the correct dock adaptor for the iPod.
2. Place the proper adaptor into the dock and
press it into position. The adaptor will only
go in one way. The iPod dock connector
should fit through the opening
of the adaptor.
3. Carefully align and then gently insert the
iPod into the dock (The iPod must not be
in a case or "SKIN").
4. To remove a dock adaptor, first remove the
iPod, then grip the adaptor and pull gently upwards.

IPOD OPERATION

in the bottom
GB 32