Section V - Heirloom Pintucks; Bridging (Fagoting) - ELNA 7300 Instructions Manual

Hide thumbs Also See for 7300:

Table of Contents

SECTION V

Heirloom

Pintucks

A beautiful accent to any project. Pintucks should

be added to your fabric before cutting out the

pattern piece.

Select 1.

Attach blind hem foot G.

Use a washable marker to draw parallel lines for

pintucks on fabric right side. Fold fabric on first line

with wrong sides together. Place fold under foot and

use foot edge as guide. Move needle position to

determine the width of the pintuck.

Sew pintuck. Sew remaining pintucks using same

method.

Remove marking lines. Press pintucks to one

side.

Two folded edges are joined together by threads

over an open area. Use linen, cotton or blend of

linen/cotton.

Select 049 or 054.

Attach satin stitc foot F.

Thread machine, needle and bobbin with fine

embroidery thread (50 weight or finer).

Use spray starch to stabilize fabric.

Fold and press under seam allowance to wrong

side of fabric. Baste folded edges of fabric on top

of thin paper or water-soluble stabilizer q. Center

stitching over the paper/fabric. Lower the presser

foot. Sew, catching the folded edges of fabric.

Remove paper or wash away stabilizer and basting

stitches.

Table of Contents