Maintenance; Recommended Maintenance Schedule(S) - Toro 30366 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
Before each use or daily
Every 50 hours
Every 400 hours
CAUTION
If you leave the key in the ignition switch, someone could accidentally start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition switch before you do any maintenance.
Maintenance Procedure
• Tighten the castor wheel nuts
• Tighten the castor wheel nuts
• Torque the blade bolts
• Lubricate the castor arm bushings
• Lubricate the castor wheel bearings
• Check the blades
• Check the gear box lubricant
• Lubricate the grease fittings
• Tighten the castor wheel nuts
• Torque the blade bolts
• Check the blade drive belt adjustment
• Clean under the cutting unit belt covers
• Change the gear box lubricant
18