Using The Fuel Shutoff Valve; Starting And Stopping The Engine - Toro 74142TE Operator's Manual

Using the Fuel Shutoff Valve

The fuel shutoff valve is located behind the seat.
Close the fuel shutoff valve for transport, maintenance, and
storage.
Ensure the fuel shutoff valve is open when starting the engine.
1
2
G008948
Figure 16
1. On
Starting and Stopping the
Engine
Starting the Engine
1. Raise the ROPS up and lock into place, sit on the seat
and fasten the seat belt.
2. Move the motion controls to neutral-locked position.
3. Set the parking brake; refer to
Brake (page 17).
4. Move the blade-control switch (PTO) to the Off
position (Figure 17).
5. Move the throttle lever midway between the Slow and
Fast positions.
G017428
2. Off
Setting the Parking
6. Turn the ignition key to the Start position
When the engines starts, release the key.
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
1. Off
2. Run
19
Figure 17
(Figure
G008947
Figure 18
3. Start
15).