Philips BDP3000 User Manual page 20

Update software via network
1
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
»
You are prompted to start upgrading
processs if upgrade media is detected.
3
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
4
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
product.
2
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG".
b Put the "UPG" folder in the root
directory.
3
the rear panel.
4
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
6
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Note
drive when software updating is in progress to prevent
possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
the centre to the edge in a straight line movement.
Play media
BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-
RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture CD, MP3-CD, WMA-CD,
Accessories supplied
Video
USB jack of
Audio
USB
Note
notice
Remote control and batteries
Audio/Video cables
Power cable
Quick start guide
User manual
Signal system: PAL / NTSC
Component video output: 480/576i, 480/576p,
720p, 1080i
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
2 Channel analog output
Coaxial
HDMI output
Sampling frequency:
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
As additional memory for software updates
and BD-Live bonus contents. Not for media
play.
EN 21