Onkyo HT-R590 Instruction Manual page 51

m Only the front speakers produce sound
Wheu the Stereo o1"Mouo listeuiug mode is selected, 29
ouly the front speakers and subwoofer produce
souud.
i-
m Only the center speaker produces sound
ff you use the Dolby Pro Logic IIx Movie, Dolby Pro --
Logic IIx Music, or Dolby Pro Logic IIx Garue
listening ruode with a mouo source, such as all AM
radio station or ruono TV prograru, the sound is
concentrated in the center speaker.
m The surround speakers produce no sound
When the T-D (Theater-Dimensional), Stereo o1"
Mono listening mode is selected, the surrouud
speakers produce uo souud.
29
Make stare the speakers are configured correctly. 36
N The center speaker produces no sound
When the Stereo or Mouo listeuiug mode is selected, 29
the ceuter speaker produces uo souud.
mThe front high or surround back speakers
produce no sound
Depending on the current listening mode, no sound 27-28
may be produced by the front high or surround back
speakers. Select auother listeuiug anode.
m The speaker volume cannot be set as required
Check to see if a maximum volume has beeu set. 19
m Noise can be heard
Usiug cable ties to bundle audio cables with power
cords, speaker cables, aud so on may degrade the
audio performauce, so dou't do it.
N The Late Night function doesn't work
Make stare the source material is Dolby Digital,
Dolby Digital Plus, or Dolby TrueHD.
44
N About DTS signals
When DTS program material ends and the DTS
bitstream stops, the AV receiver remains in DTS
listening mode and the DTS indicator remains on.
This is to prevent noise when you use the pause, fast
forward, or fast reverse function on your player. If
you switch your player from DTS to PCM, because
the AV receiver does not switch formats
immediately, you may not hear any sound, in which
case you should stop your player for about three
seconds, and then resume playback.
Make stare the speakers are configured correctly.
36
N The subwoofer produces no sound
Wheu you play source material that coutaius uo
iuformatiou iu the LFE channel, the subwoofer
produces uo souud.
N There's no sound with a certain signal format
Check the digital audio output setting ou the
couuected device. Ou some game consoles, such as
those that support DVD, the default settiug is off.
Depeudiug on the input signal, some listening modes 27-28
cannot be selected.
N
When playing DTS program material, using the
pause, fast forward, or fast reverse function on your
player may produce a short audible noise. This is not
a malfunction.
The beginning of audio received by an HDMI IN
can't be heard
Since it takes longer to ideutify the format of an
HDMI signal than it does for other digital audio
signals, audio output may not start immediately.
N Can't get 6.1/7.1 playback
If no surrouud back speakers or front high speakers
are couuected, 6. 1/7.1 playback is uot possible.
N There's no picture
Make stare that all video connecting plugs are pushed 13
iu all the way.
ff the video source is connected to a component
video input, you must assign that input to an input
selector, and your TV must be connected to
COMPONENT VIDEO OUT.
15, 35
EF1
51