Hdmi Input; Component (Component Video Input); Digital Audio (Digital Audio Input) - Onkyo HT-R590 Instruction Manual

If you connect avideo c omponent toanHDMI input, you
must assign that i nput toaninput selector. For e xample, if
you connect your Blu-ray Disc/DVD player toNDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD HDMII
VCR/DVR HDMI2
CBL/SAT HDMI3
(;AME HDMI4
AUX ....
TV/CD ....
m BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
HDMI1, HDMI2, HDMI3, HDMI4:
Select a corresponding HDMI input that the video
component has been connected.
Select if you're not using the NDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI4 have
already been assigned, you must set first any unused
input selectors to .... , or you will be unable to
assign HDMI1 - HDMI4 to input selector.
• When all HDMI IN is assigned to all input selector as explained
here, the digital audio input for that input selector is
automatically set to the same HDMIIN
•
Do
not assign the component
connected with the HDM[
input to
TV/(TDselector when you set "HDMI Ctrl
(RIHD)"
settingto
"On" (3 page 42). Otherwise, appropriate CEC (Consumer
Electronics
Control) operation
will not be
guaranteed.
[efelilltIele[:-lel#'_efelilltIele[:-leli_[;.IslflMtl#l_i
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD INI
VCR/DVR ....
CBL/SAT IN2
(;AME ....
AUX ....
TV/CD ....
m BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
_IN1, IN2:
Select a corresponding component video input that
the video component has been connected.
,:
Select if you're not using the COMPONENT
VIDEO OUT.
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPTICALI" to the "TV/CD" input
selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD COAXIALI
VCR/DVR .....
CBL/SAT COAXIAL2
GAME OPTICALI
AUX .....
TV/CD OPTICAL2
m BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
COAXIAL1, COAXIAL2, OPTICAL1,
OPTICAL2:
Select a corresponding digital audio input that the
component has been connected.
,:
Select if the component is connected to an analog
audio input.
• When an HDMI IN is assigned to an input selector in
"HDM[
Input" (3 page 35), this input assignment
is
automatically set
to the
same HDMI IN
And in addition to the
usual
inputs (e.g., COAXlALI, COAXIAL2, etc.),
you can also
select HDM[
inputs.
• Available
sampling rate for PCM
signals
from
a digital input
(optical and coaxial)
is 32/44.1/48/88.2/96 kHz/l
6, 20,
24 bit.
En
35