2.2.3.
Control Panel Unit, Battery
Ver. 1.2
<Replace the Battery>
(1) Remove 1 Screw (Q8).
(2) Remove the Battery Holder (503).
(3) Replace the Battery (504).
Note:
Ensure that the battery is installed with correct
polarity.
(4) Reinstall the Battery Holder (503) and the
Screw (Q8).
<Control Panel>
(5) Open the Left Cover.
(6) Remove 2 Silver Screws (S6).
(7) Remove the Left Scanner Cover (101).
(8) Remove 2 Shoulder Silver Screws (X2).
(9) Remove the Right Scanner Cover (132).
(10) Remove 2 Silver Screws (1027).
(11) Slightly lift the Control Panel Assembly (538).
(12) Disconnect the Harness on the PNL1 PC Board
(CN220).
(13) Remove the Control Panel Assembly.
53
DP-1520P/1820P/1820E
SEP 2004