Installing The Expansion F-Rom Board (Da-Em600) - Panasonic DP-1820P Service Manual

8.9.

Installing the Expansion F-ROM Board (DA-EM600)

8.9.1. Contents
Qty.
1 Expansion F-ROM Board
2 PC Board Support
1 Installation Instructions
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.9.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Ver. 1.2
Description
(1) Remove 10 Screws.
(2) Remove the Rear Cover.
(3) Remove the Black Pin Protector from Slot 1
(4) Install 2 PC Board Supporters for the Slot 1 on
(5) Install the Program Expansion Board into Slot
Note:
(6) Proceed with the installation of other options.
(7) Plug the AC Power Cord and turn the Power
(8) Reconnect the Telephone Line Cable if it was
361
Part No.
DZEC102137
DZJH000084
DZSM000756 This document
(CN62), if it was preinstalled.
the SC PC Board.
1 (CN62) on the SC PC Board and secure with
the Supporters.
The Program Extension F-ROM Board must
always be installed into Slot 1 (CN62) for the PCL
or PCL/PS Printer Option to function.
If finished, reinstall all Harnesses and Covers.
Switch on the Right Side of the machine to the
ON position.
disconnected.
DP-1520P/1820P/1820E
Remarks
SEP 2004