Installing The Inverting Automatic Document Feeder (Da-Ar202) For Dp-1820E - Panasonic DP-1820P Service Manual

8.13. Installing the Inverting Automatic Document Feeder (DA-AR202)
for DP-1820E
8.13.1. Contents
Qty.
Inverting Automatic Document Feeder
1
(i-ADF)
1 Scanning Pad
2 Hinge Stopper
2 Hinge Cover
2 Hinge Cover 2
2 ADF Mounting Bracket
1 i-ADF OPS Actuator
1 i-ADF Rear Support Bracket
9 Screw
8 Screw
2 Silver Screw
2 Thumb Screw
1 Installation Instructions
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.13.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Ver. 1.2
Description
365
Part No.
See Note
DZJM000428
DZJA000726
DZMC000713
DZMA004372 From July 2004 Production
DZJA000730
DZJM001007
DZJD000035
XTB3+8J
XTB3+12J
XSN4+W10FN
DZPA000064
DZSM000551 This Document
(1) Using a Slotted Blade Screwdriver, remove the
OPS Actuator as illustrated.
Note:
Release the latch on the left side of the actuator
with the Slotted Blade Screwdriver.
DP-1520P/1820P/1820E
Remarks
For DP-1820E
Not Used
4 Screws will not be used
SEP 2004