Drive System Maintenance; Checking The Tire Pressure - Toro 74433 Operator's Manual

Hide thumbs Also See for 74433:
Table of Contents

Advertisement

• Main F1-30 amp, blade-type
• Charge Circuit F2-25 amp, blade-type
1. Raise the seat to gain access to the fuse holder
(Figure 45).
2. To replace a fuse, pull out on the fuse to remove it
(Figure 45).
Figure 45
1. Relays
2. Alarm
3. Positive battery cable
4. Battery
5. Fuse block
6. Main-30 amp
7. Charge circuit-25 amp
8. Open slots
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires
as specified. Uneven tire pressure can cause uneven
cut. Check the pressure at the valve stem after every
50 operating hours or monthly, whichever occurs first
(Figure 46). Check the tires when they are cold to get
the most accurate pressure reading.
Rear Tires: 13 psi (90 kPa)
Front Tires (castor wheels): 35 psi (139 kPa)
1. Valve stem
34
Figure 46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter zd420

Table of Contents