Advertisement
Available languages
Available languages
7.
Press the " " button (D) to switch off the alarm function. The alarm symbol (6) goes out. Press the " " button (D) to switch
on the alarm. The alarm symbol (6) is displayed.
After the alarm is triggered, it can be switched off by a light movement of the hand in front of the movement sensor (7).
E) Switching the display
1.
Briefly press the "Clock" button (C) once: the day of the week display (5) appears.
2.
Press the "Clock" button (C) twice: the current date is displayed (5).
3.
Press the "Clock" button (C) three times: the time display (5) appears again.
1.
Briefly press the "UNIT" button (H) once to switch between the °C or °F display units.
1.
Press the "MEMORY" button (F) to switch between the maximum/minimum temperature values (4).
2.
Press the "MEMORY" button (F) and hold it down for 2 seconds to delete the maximum and minimum values for outside and
inside temperature.
F) Illumination functions
The device has backlight illumination of the LC display and of the weather display window and a coloured illumination cycle of
ca. 6 seconds in duration.
They can be set to save battery output. During battery operation, the illumination duration is 16 seconds; during operation with
the plug-in power supply unit, it is limited to 24 seconds. Illumination is activated without contact by means of a light wave of
the hand in front of the sensor (7).
The sliding switch (B) has three positions:
"ON" - illumination function in operation
"OFF"
- illumination function switched off
"AUTO" - illumination function automatic.
1.
Move the sliding switch (B) to the positions "AUTO" or "ON" with a sharp object. The programming of the backlight is
activated.
2.
Press the "UNIT" button (H) for 2 seconds. The cut-off duration of the backlight is displayed. Set the pause duration in
minutes (5, 10, 20, 30 or 60 min.) with the " " (E) or the "
switches on for 16 or 24 seconds after the set duration has passed.
3.
"ON" or "OFF" appears on the LC display. Use the " " (E) or "
coloured LEDs).
G) Weather forecast
The weather station collects data concerning the air pressure tendency and gives a weather forecast for the next 12 to 24 hours.
The weather station has altogether 5 different weather indications:
Sunny
Overcast
Cloudy
Rainy
Stormy
20
The symbol is displayed in red.
The symbol is displayed half in yellow and half in white.
The symbol is displayed in green.
The symbol is displayed in blue.
The symbol is blinking every 2 seconds in blue.
" (D) button. Confirm with the "UNIT" button. Now the backlight
" (D) button for changing the illumination cycle (a series of
Advertisement
Chapters
