Siqura TRAFFICPTZ ULTIMO Installation Manual
  1. Manuals
  2. Brands
  3. Siqura Manuals
  4. IP Camera
  5. TRAFFICPTZ ULTIMO
  6. Installation manual

Siqura TRAFFICPTZ ULTIMO Installation Manual

Installation and operating instructions
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TrafficPTZ Ultimo
Full HD PTZ IP camera system with advanced analytics

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRAFFICPTZ ULTIMO and is the answer not in the manual?

Questions and answers

Related Manuals for Siqura TRAFFICPTZ ULTIMO

Summary of Contents for Siqura TRAFFICPTZ ULTIMO

  • Page 1 TrafficPTZ Ultimo Full HD PTZ IP camera system with advanced analytics...
  • Page 2 Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant product components, this manual may nonetheless contain errors and inaccuracies.

  • Page 3: Table Of Contents

    System requirements ................Connect to a LAN ................. Get access to the unit ................Get access via web browser ..............Get access via Siqura Device Manager ............ Get access via UPnP ................Log on to the unit ................Live Stream ....................
  • Page 4 Contents 11.3 Parapet bracket ................... Maintaining ....................12.1 Fuses replacement ................Cleaning ....................13.1 Window and plastic cover cleaning ............Disposal of waste materials ..............Troubleshooting ..................Technical drawings ................... Appendix: Replace the camera ..............Open the housing ................Disconnect cables ................Remove the module ................

  • Page 5: About This Manual

    About this manual Before installing and using this unit, read this manual carefully. Be sure to keep it handy for later reference. In This Chapter 1.1 Typographical conventions..................5 1.2 Copyright and trademarks..................5 Typographical conventions DANGER! High-level hazard. Risk of electric shock. Disconnect the power supply before proceeding with any operation, unless indicated otherwise.

  • Page 6: Safety And Compliance

    Safety and compliance In This Chapter 2.1 Safety rules......................6 2.2 Compliance......................7 Safety rules CAUTION! The electrical system to which the unit is connected must be equipped with a 20 A max automatic bipolar circuit breaker. This circuit breaker must be of the Listed type. The minimum distance between the contacts must be 3 mm (0.1 in).

  • Page 7: Compliance

    If the device has to be removed from the installation, always disconnect the earth cable last. ● Take all necessary precautions to prevent the apparatus from being damaged by electrostatic discharge. Compliance The EU Declaration of Conformity for this product is available for download at www.siqura.com/support-files.

  • Page 8: Identification

    Open standards Its careful assembly and compliance to open standards ensure that the TrafficPTZ Ultimo integrates with the most common VMSes out of the box. If you wish to incorporate the camera’s special features in your dedicated client software, the Siqura Programming Interface offers an easy HTTP API for guaranteed interoperability.

  • Page 9: Checking The Markings

    Identification The Siqura product label is located inside the upper half of the body. The label shows: ● Model number ● Article number ● Power supply ● RoHS compliancy ● MAC address ● IP address ● Serial number 3.2.1 Checking the markings Before proceeding further with installation, make sure the material supplied corresponds to the order specification by examining the marking labels.

  • Page 10: Versions

    Integrated wiper The product is equipped with a wiper. It can be controlled from the web interface of the TrafficPTZ Ultimo. The product can also be equipped with an external pump that supplies water for the glass to be cleaned. The pump can also be controlled from the web interface.

  • Page 11: Preparing The Product For Use

    Preparing the product for use Any change that is not expressly approved by the manufacturer will invalidate the guarantee. The unit must not be dismantled or tampered with. The only exceptions are those concerning the assembly and maintenance operations stipulated in this manual. In This Chapter 5.1 Safety precautions before use.................11 5.2 Unpacking......................11...

  • Page 12: Disposing Of Packaging Material

    Preparing the product for use Desiccant bag Bolts and screws Disposing of packaging material The packaging material can all be recycled. The installer technician will be responsible for separating the material for disposal, and in any case for compliance with the legislation in force where the device is to be used.

  • Page 13: Installation

    Installation Never, under any circumstances, make any changes or connections that are not shown in this handbook. Failure to follow the connection instructions that are given in the handbook may create serious safety hazards for people and for the installation. Do not change the wiring in the product as it is supplied to you.

  • Page 14: Fixing The Base To The Support

    To ensure reliable operation, it is recommended that only Cat 5e STP cable is used to connect the TrafficPTZ Ultimo to the network. Pay attention to the fixing. Tightening torque: 5 Nm. For cables diameter from 3 mm to 7 mm use the supplied gaskets.

  • Page 15: Connection Of The Power Supply Line

    Installation ® Apply a thread-locker on the holes of the screws (Loctite 243 Pay attention to the fixing. Tightening torque: 4 Nm. Connection of the power supply line Depending on the version, the device can be provided with different power supply voltages. Their value is shown on the product identification label (see "Product markings"...

  • Page 16: 120 Vac And 230 Vac Power Line Connection

    Installation In case of using the TrafficPTZ Ultimo camera in an FCC Class B emission critical environment, it is recommended to apply a cable snap ferrite on the power cable for reduced emission. Recommended ferrite: Würth 74271221. Place the ferrite as close to the housing as possible.

  • Page 17: Connection Of The Ethernet Cable

    Installation CONNECTION OF THE POWER SUPPLY LINE Colour Terminals Power supply 230 Vac Blue N (Neutral) Brown L (Phase) Yellow/Green Power supply 120 Vac Blue N (Neutral) Brown L (Phase) Yellow/Green Connection of the Ethernet cable Before crimping the Ethernet cable, arrange the wires in the correct order before you place them in the RJ-45 connector.

  • Page 18: Fixing The Upper Body

    Installation Fixing the upper body Fix the upper body (01) to the base (02) using the fixing screws (03) equipped with gaskets (04). Make sure the base seal is present and in good condition (05). Pay attention to the fixing. Tightening torque: 4 Nm.
  • Page 19 Installation There is one anchoring position between the base and upper body. Align side projections to obtain the correct positioning. The dip switches of the unit are set for proper operation. It is not necessary to modify the factory-default settings. Doing so may lead to undesired results.

  • Page 20: Switching On

    Switching on Make sure that the unit and other components of the installation are closed so that it is impossible to come into contact with live parts. During normal operation the surface of the illuminator can reach high temperatures. Do not allow direct contact and position the appliance where it is inaccessible to unauthorised persons.

  • Page 21: Network Connection

    UPnP: enabled ● Logon: not required If no DHCP server is available, the unit will configure itself automatically with the address 10.x.y.z. The fixed IP address is printed on the Siqura label located inside the upper half of the body.

  • Page 22: Get Access To The Unit

    From a standard browser on your PC, you can connect to the built-in web interface of the unit. Using the TrafficPTZ Ultimo webpages, you can view live video over the network, remotely operate the PTZ functions, and configure the settings of the unit. This chapter explains how to open the webpages in your browser.

  • Page 23: Get Access Via Upnp

    Connect to the unit via UPnP In Windows Explorer, open the Network folder. Detected devices in the same subnet as the computer are displayed, including Siqura codecs and cameras with UPnP support. Double-click the unit that you want to connect to.

  • Page 24: Live Stream

    Live Stream The Live Stream page is the home page of the camera. This is where you can: ● View and record live video ● Take snapshots ● Turn on the washer and wiper ● Pan, tilt and zoom the camera ●...
  • Page 25 Live Stream Use the washer Clicking Wash starts a washer sequence. The camera will temporarily move to the position required for the washer function and then return to its previous position. Take a snapshot It is possible to take a snapshot of the video in the camera preview. ●...
  • Page 26 Live Stream You can also (re)name presets on the PTZ Presets page. Recall a PTZ preset Camera positions stored as PTZ preset can be recalled. ● In the PTZ preset list, click the required preset. The camera adopts the recorded position. Delete a PTZ preset Camera positions stored as PTZ preset can be deleted when no longer needed.

  • Page 27: Accessories

    Accessories In This Chapter 11.1 Washer......................27 11.2 Wall mount......................28 11.3 Parapet bracket....................28 11.1 Washer The unit can be equipped with an external pump that supplies water for the glass to be cleaned. Available models: ● TPWP01 (23 L, 11 m) ●...

  • Page 28: Wall Mount

    Accessories WASHING SYSTEM CONNECTION Terminals Description O1-C1 Clean contact to activate the washing system. 11.2 Wall mount TPWM01: Wall mount bracket with internal cable channel. 11.3 Parapet bracket TPTM01: Pole top mount (parapet) bracket with internal cable channel.

  • Page 29: Maintaining

    Maintaining Maintenance must be carried out by personnel trained to operate on electrical circuits. In This Chapter 12.1 Fuses replacement....................29 12.1 Fuses replacement Maintenance must be performed with the power supply disconnected and the circuit- breaker open. If necessary, replace the fuse illustrated in the figure below. FUSES REPLACEMENT Voltage Fuse F1...
  • Page 30 Maintaining CONNECTOR BOARD DESCRIPTION Connector/Component Function Board power supply Signal cables Ethernet Ethernet Fuse Fuse...

  • Page 31: Cleaning

    Cleaning In This Chapter 13.1 Window and plastic cover cleaning.................31 13.1 Window and plastic cover cleaning Avoid ethyl alcohol, solvents, hydrogenated hydrocarbide, strong acid and alkali. Such products may irreparably damage the surface. We recommend using a soft cloth with neutral soaps diluted with water or specific products to clean eyeglasses lenses.

  • Page 32: Disposal Of Waste Materials

    Disposal of waste materials This symbol and recycle system apply to EU countries only. They are not applicable to countries in other areas of the world. Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

  • Page 33: Troubleshooting

    Troubleshooting Ask for assistance from skilled personnel if: ● The unit is damaged after being dropped. ● There is noticeable deterioration in performance of the unit. ● The unit does not work properly, even though all the instructions in this handbook have been followed.

  • Page 34: Technical Drawings

    Technical drawings The dimensions of the drawings are in millimetres.

  • Page 35: Appendix: Replace The Camera

    Appendix: Replace the camera The TrafficPTZ Ultimo comes standard with Siqura's BC840v2-TP camera assembled. The customer does not have to take care of installing the network camera in the housing. If in the course of its lifetime the camera module inside the TrafficPTZ Ultimo becomes damaged or faulty, only the same model qualifies for replacement.

  • Page 36: Disconnect Cables

    Appendix: Replace the camera Disconnect cables Disconnect the power cables. Disconnect the Ethernet and data cables.

  • Page 37: Remove The Module

    Appendix: Replace the camera Disconnect the heater cable. Remove the module Loosen the four screws which fasten the internal support slide. Remove the camera module.

  • Page 38: Install The New Module

    Appendix: Replace the camera Install the new module Check if the gap pad between the housing and the processor is still usable and correctly positioned. Replace the pad if necessary. Place the new module inside the housing and fasten the four screws which hold the internal support slide.
  • Page 39 Appendix: Replace the camera Close the cover of the housing and fasten the two screws on the side. When you close the cover, check if none of the cables gets trapped between the cover and the housing.

  • Page 40: Appendix: Housing Board Description

    Appendix: Housing board description In This Chapter Board description....................... 40 Connection of the camera and motorised lens..............40 Board description BOARD DESCRIPTION Connector/ Function Terminal Camera power supply, additional lines Connection of the camera and motorised lens All connections illustrated below should be made only and exclusively by expert installers who should comply with all the wiring and power supply specifications for the devices.
  • Page 41 Appendix: Housing board description To power the camera perform the connections as shown in the figure below.

  • Page 42: Appendix: Micro Sd Card

    Appendix: Micro SD card The TrafficPTZ Ultimo supports SDHC and SDXC micro SD cards. This appendix tells how to install a micro SD card in the unit. In This Chapter Install a micro SD card....................42 Install a micro SD card CAUTION! Before you open the upper half of the body, make sure the power supply is disconnected.

  • Page 43: Appendix: Reset Button

    Appendix: Reset button You can reset the TrafficPTZ Ultimo to its factory-default settings via the Device Management page of the web interface. Two options are available there: a reset of all variables set by the user, keeping the network settings or excluding the network settings.

  • Page 44: Reset Including Network Settings And Firmware Image

    A reset including the network settings can make the unit unreachable for in- band communications, in which case the web interface is accessible only by (temporarily) moving a PC to the same subnet as the TrafficPTZ Ultimo. Reset including network settings and firmware...

  • Page 45: Index

    Fixing the upper body......18 System requirements......21 Fuses replacement........29 Technical drawings......... 34 Get access to the unit......22 Troubleshooting........33 Get access via Siqura Device Manager..22 Typographical conventions......5 Get access via UPnP........ 23 Get access via web browser..... 22 Unpacking..........11 Identification........... 8...
  • Page 46 Index Versions..........10 Wall mount..........28 Washer..........27 Washing system connection..... 27 Window and plastic cover cleaning.... 31...

Table of Contents