Maintenance; Recommended Maintenance Schedule(S) - Toro 23515 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 300 hours
Yearly or before storage
CAUTION
If you leave the spark pug wire connected, someone could accidently start the engine and seriously injure
you or other bystanders.
Before performing any maintenance, park the unit on a level surface, stop the engine, and disconnect the
spark plug wire. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Check the condition and tension of the tine drive chains.
• Check the condition of the front drive chains.
• Check the condition of the drive chain sprockets.
• Lubricate the tine drive chains.
• Check the condition of the coring tines and replace any that are damaged or
excessively worn.
• Check for loose fasteners.
• Clean the engine and exhaust system area.
• Clean grass and debris buildup from the machine.
• Grease tine shaft bearings.
• Grease tine assembly idlers.
• Lubricate the front drive chains.
• Clean the foam pre-cleaner (more frequently in dusty conditions).
• Check the tension of the hydrostatic drive belt.
• Change the engine oil.
• Check the spark arrester (if equipped).
• Check for leaks in the fuel systems and/or deteriorating fuel hose.
• Check the tire pressures.
• Change the oil filter.
• Inspect, clean, and adjust the spark plug; replace it if necessary.
• Clean the fuel filter element.
• Change the hydraulic transmission fluid.
• Replace the spark plug.
• Replace the fuel filter. (More frequently in dusty conditions.)
• Replace the air cleaner elements (more frequently in dusty conditions).
• Touch up chipped paint.
18