Rear Panel - Onkyo DV-SP402E Instruction Manual

Front & Rear Panels—Continued

Rear Panel

1 2 3 4
AUDIO OUTPUT
COMPONENT
DIGITAL
Y
OPTICAL COAXIAL
S VIDEO VIDEO
VIDEO OUTPUT
A
OPTICAL DIGITAL AUDIO OUTPUT [20]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
B
COAXIAL DIGITAL AUDIO OUTPUT [20]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
S VIDEO OUTPUT [19]
This connector can be used to connect a TV or pro-
jector with an S-Video input.
D
VIDEO OUTPUT [17]
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
E
COMPONENT VIDEO OUTPUT [19]
These sockets output component video and can be
connected to an component video input on a TV or
projector.
F
ANALOG AUDIO OUTPUT [17]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
5 6 7
REMOTE
L
P
B CONTROL
AV CONNECTOR
AUDIO
OUTPUT
ANALOG
R
P
R
8
DV-SP 402E
MODEL NO.
G
jack [21]
These (Remote Interactive) connectors can be
connected to the
Onkyo AV components for interactive control.
Connecting an
system operational. You must also connect the audio
cables as well.
H
AV CONNECTOR [19]
This SCART output can be connected to a TV or
projector with a SCART input by using the supplied
SCART cable. This SCART connector outputs 2-
channel stereo audio, composite video, S-Video,
and RGB video.
I
AC INLET [22]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
9
AC INLET
connectors on your other
cable only does not make the
13