Recommended Maintenance Schedule - Toro 07363 Operator's Manual

Air cooled gas utility vehicle
Table of Contents

Advertisement

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 5 hours
After first 10 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1200 hours or 2
years (whichever
occurs first)
1
immediately after every washing, regardless of the interval listed
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Replace the engine oil and filter.
• Check cable adjustments
• Check pump drive belt tension
• Torque wheel lug nuts
• Replace transaxle filter
• Check the battery fluid level.
• Check the battery cable connections.
• Lubricate engine pre filter
• Replace engine oil and filter
• Lubricate all grease fittings
• Inspect condition and wear of tires
• Remove engine shrouds and clean fins
• Check cable adjustments
• Check pump drive belt tension
• Replace air cleaner filter
• Check engine RPM (idle and full throttle)
• Torque wheel lug nuts
• Check front wheel alignment
• Inspect service and parking brakes
• Inspect fuel lines
• Replace fuel filter
• Replace transaxle filter
• Change transaxle oil
• Clean transaxle strainer
• Replace spark plugs
• Pack front wheel bearings
• Replace all interlock switches
• Fuel tank–drain/flush
• Change brake fluid
34
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 3100

Table of Contents