Hand-Arm Vibration; Safety And Instructional Decals - Toro Powerlite 38273 Operator's Manual

Hand-Arm Vibration

Measured vibration level for the left hand = 8.4 m/s
Measured vibration level for the right hand = 10.7 m/s

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Order part no. 117-7742
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—do not place your hand in
the chute; remove the ignition key and read the instructions
before servicing or performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—stop the engine
before leaving the machine.
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
117-6047
Uncertainty Value (K) = 4.3 m/s
The measured values were determined according to the
2
procedures outlined in EN ISO 20643.
2
1. Primer
2. Push the primer two times
to prime the engine.
3. Push key in to switch
engine On.
117-7713
4. Fuel spill hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. Release the control bar to disengage the auger.
4
2
120-0149
4. Pull key to switch engine
switch Off.
5. Remove key to lock
machine.
6. Read the Operator's
Manual before checking
engine oil level.