Onkyo DR-2000 Instruction Manual page 23

DVD
Tip to obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while
playing a DVD video because the high resolution pictures on
these discs include a lot of information. While the amount of
noise depends on the TV you use, you should generally
adjust the TV to reduce sharpness when viewing DVD
videos.
To remove the disc
Press r to open the disc tray.
Remove the disc after the disc tray opens completely.
After removing the disc, be sure to press the button again to close
the tray.
To pause playback (still mode)
Press (remote controller only) during playback.
To start playback, press s.
DVD
To play frame by frame
VCD
Press repeatedly during pause. Each time you press
picture advances one frame.
To resume normal playback, press s.
Note
The sound is muted during still mode and frame by frame playback.
To stop playback
Press e.
When you press s to restart playback, playback starts from the
location where you stopped playback because the location index is
stored in memory.
Note
The location where playback resumes may vary depending on the disc or the
stopped scene.
Resuming playback from the beginning
Press e again after stopping playback to clear the location index memory,
then press s to start playback.
DVD
Playback starts from the beginning of the current title.
To start playback from the beginning of the DVD video, open and close
the disc tray (press r twice), then press s to start playback.
VCD
Playback starts from the beginning of the disc.
CD
Note
The location index memory will also be cleared when:
• The power cord (mains lead) is unplugged,
• The DVD Receiver has entered standby mode,
• The disc tray is opened,
• The parental lock setting is changed (see page 58) or a disc menu language
is selected (see page 54), or
• The other input source is selected.
DVD
VCD
3
DVD
VCD CD
DVD VCD CD
3
, the
DVD VCD CD
Notes
• When you start playing a CD, the sound may not be
reproduced briefly while the DVD Receiver recognizes
the sound system (DTS Surround or PCM). If this
happens, stop playback by pressing e twice, then press
s to restart playback. The sound will be reproduced
from the beginning of the disc.
• Do not move the DVD Receiver during playback. Doing
so may damage the disc.
• Use r on the remote controller or DVD Receiver to open
and close the disc tray. Do not touch the disc tray while it
is moving. Doing so may cause the DVD Receiver to
malfunction.
• Do not press down on the disc tray or put any objects
other than playable discs on the disc tray. Doing so may
cause the DVD Receiver to malfunction.
• In many instances, a menu screen appears when
playback of a movie is complete. Prolonged display of an
on-screen menu may damage your television set,
permanently etching that image onto its screen. To avoid
this, be sure to press e once the movie is complete.
Before operating the remote
controller
Press MODE DVD.
CH
ENTER VOL
TUN
REPEAT MUTING
A – B DIMMER
REC OPEN/CLOSE
RANDOM SLOW
SUBTITLE – ON / OFF ANGLE ZOOM
MEMORY CLEAR AUDIO DISPLAY
SW MODE TEST TONE
1 2 3
LATE NIGHT DISTANCE
4 5 6
SP A CH SEL
7 8 9
T– D SETUP UP/ DOWN
SP B
+ 10
0
SEARCH
-- / ---
REMOTE CONTROLLER
RC-437M
1
23