Onkyo DR-2000 Instruction Manual page 19

Setting up Non-Onkyo Speakers
Display
STANDBY/ON
ON
STANDBY
POWER
ON OFF
SPEAKER A/B SUBWOOFER TEST TONE DISTANCE
PHONES MODE
SUBWOOFER
MODE
Press the lower
ON OFF
part of the cover
to open.
Selecting the number of speaker channels
Unit only Press SPEAKER SETUP repeatedly
to select the number of channels
for the SPEAKERS A system.
SPEAKER SETUP
Although "SmartConfig" may appear in the
display, do not select "SmartConfig" in this
step.
Within three seconds, press the button
repeatedly. The number of channels
changes as follows (the corresponding
speaker configuration is described in
parentheses):
SmartConfig
Do not select this in this step. If "SP-
" appears, you can move to the next
setting by pressing SPEAKER SETUP.
Speaker 2
(Front left and right speakers)
Speaker 3
(Front left, center, and right speakers)
Speaker 4
(Front left and right, plus surround left
and right speakers)
Speaker 5
(Front left, center, and right, plus
surround left and right speakers)
The normal display resumes in three
seconds.
Notes
• The listening mode will automatically be set to
"Stereo" (see page 38) once you set or reset
the number of channels.
• To check the present setting while the normal
display is displayed, press SPEAKER SETUP
once. To change the setting, press the button
repeatedly within three seconds.
DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD FM AM VOLUME
INPUT
ACOUSTIC
SURROUND STEREO Theater-Dimensional CONTROL
TUNER PRESET
CH SEL Theater-Dimensional DOWN UP FM MODE PRESET MEORY TUNING DISPLAY SPEAKER SETUP
SETUP
SPEAKER
SETUP
ON OFF
PHONES
ch
ch
ch
ch
Before operating the
remote controller
Press MODE AUDIO.
The remote controller
remains in the AUDIO mode
until another MODE button is
pressed.
Setting the Subwoofer Mode
Press SUBWOOFER MODE on the
Unit
unit or SW MODE on the remote
controller.
SUBWOOFER
MODE
Remote controller
SW MODE
With the first press of the button, you can
1
check the present setting. Then each press
of the button changes the subwoofer mode
as follows (a tip on how to select the right
subwoofer mode is in parentheses):
SW Mode 2
(When large–wideband–front speakers
are connected)
SW Off
(When no subwoofer is connected)
SW Mode 1
(When small–with limited bass signal
handling–front speakers are
connected)
The normal display resumes in three
seconds.
CH
ENTER VOL
TUN
REPEAT MUTING
A – B DIMMER
REC OPEN/CLOSE
RANDOM SLOW
SUBTITLE – ON / OFF ANGLE ZOOM
MEMORY CLEAR AUDIO DISPLAY
SW MODE TEST TONE
SW MODE
1 2 3
LATE NIGHT DISTANCE
4 5 6
SP A CH SEL
7 8 9
T– D SETUP UP/ DOWN
SP B
+10
0 SEARCH
-- / ---
19