Setting The Clock Manually - Onkyo CR-N7 Instruction Manual

Setting the Clock Manually

You can select either the 12-hour or 24-hour display.
(This section explains how to set the time based on the
24-hour display.)
Display
DISPLAY
button
STANDBY/ON
1 Press TIMER repeatedly until
"Clock" appears in the display.
2 Press MULTI JOG.
3
Turn MULTI JOG.
Select "Manual Adjust."
4 Press MULTI JOG.
You can now set the day of the week.
5
Turn MULTI JOG to select the cur-
rent day of the week.
SUN - Sunday
MON - Monday
TUE - Tuesday
WED - Wednesday
6 Press MULTI JOG to confirm the
setting.
You can now set the time.
EDIT/
NO/
CLEAR
1 2-8
To cancel the clock setting
Press EDIT/NO/CLEAR.
THU - Thursday
FRI - Friday
SAT - Saturday
Setting the Clock—Continued
7 Turn MULTI JOG to set the current
time.
You can also use the number buttons on
the remote controller.
To switch between the am and pm indica-
tors, press the >10 button on the remote
controller.
8
Press MULTI JOG to start the
clock.
You can also use the ENTER button on
the remote controller.
It can be helpful to synchronize with an
accurate time source.
The clock starts operating and a dot indi-
cating seconds starts to flash.
Using the remote controller
Number buttons
3, 5, 7
1
CLOCK CALL
DISPLAY
EDIT/
NO/CLEAR
2, 4, 6, 8
45