Setting The Clock Manually; Displaying The Date & Time; Displaying The Time In Standby Mode - Onkyo CR-505 Instruction Manual

Powering Up and Setting the Clock— Continued
STANDBY/ ON
2
1
5
4
8
7
--/---
10/0
DISPLAY
SLEEP
MUTING
CD
MD

Setting the Clock Manually

For European models:
If you cannot set the clock by using the ACCUCLOCK
function, you can set it manually. In this case, the
ACCUCLOCK function will not automatically cali-
brate the clock each day.
1
Press the [TIMER] button repeatedly until
"CLOCK" appears.
Only for European models:
Press the [ENTER] button and use the Up/Down [ ]/
[ ] buttons to select "MANUAL ADJ."
2
Press the [ENTER] button.
The day of the week flashes.
3
Use the Up/Down [ ]/[ ] buttons to select
a day.
18
CLOCK CALL
CLOCK
CALL
3
TIMER
TIMER
6
9
CLEAR
ENTER
ENTER
MODE
REPEAT
INPUT
DIRECT
4
Press the [ENTER] button.
The time flashes.
5
Use the Up/Down [ ]/[ ] buttons to set
the time.
6
Press the [ENTER] button to set the clock.
"ADJUSTED" appears on the display.
Displaying the Date & Time
1
Press the [CLOCK CALL] button.
The date and time appear on the display.
Press the [CLOCK CALL] button again to return to the
previous display.
STANDBY / ON
PHONES INPUT MENU DIRECT
STANDBY/ON
Displaying the Time in Standby
Mode
You can set the CR-505 so that the time is displayed while
the CR-505 is in Standby mode.
1
With the CR-505 turned on, press and hold
the CR-505's [STANDBY/ON] button for
more than 2 seconds.
To turn off the time display, repeat this procedure.
Note:
Setting the CR-505 to display the time will slightly increase
the power consumption in Standby mode.
VOLUME
MIN MAX
PRESET
BASS TREBLE
PUSH TO ENTER