Positioning The Seat; Lights; Positioning The Tilt Steering Wheel; Centering The Steering Wheel - Toro 73542 Operator's Manual

Hide thumbs Also See for 73542:
Table of Contents

Advertisement

Lowering Attachments
1. Start the tractor.
2. Push the lift lever down to lower the attachment
(Fig. 20).

Positioning the Seat

You can move the seat forward and backward. Position the
seat where you have the best control of the machine and
are most comfortable.
1. Move the adjustment lever sideways to unlock seat
(Fig. 21).
2. Slide the seat to the desired position and release the
lever to lock the seat into position.
Important
Ensure that the seat is locked in position
before operating.
1
Figure 21
1. Adjustment lever

Lights

The lights turn on whenever you turn the ignition key to
or past the lights position (Fig. 22). You can turn then on
even if the engine is not running; therefore remove the
ignition key when leaving the machine unattended so that
no one can accidentally turn on the lights and discharge
the battery.
Figure 22
1. Lights
Positioning the Tilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 23).
2. Move the steering wheel to a comfortable position;
then release the lever to lock it in place.
1. Tilt lever

Centering the Steering Wheel

(Power Steering Models)

M 3320
The power steering may not always return the steering
wheel to the centered position when you turn the wheels
straight forward. If this happens, center the steering wheel
using the following procedure:
1. Note the degree to which the steering wheel is out of
center.
2. Turn the steering wheel all the way in the opposite
direction until the front wheels no longer turn.
3. Continue turning the steering wheel by the degree to
which it is off center.
4. Turn the steering wheel in the other direction until the
front wheels aim straight ahead.
The steering wheel should now be centered.
1
The Smart Turnt Steering
Feature
The Smart Turnt Steering feature automatically lowers
m–3312
the speed of the tractor in tight turns. The decrease in
speed is directly proportional to the sharpness of the turn,
up to a maximum speed reduction of 40 percent. This
18
1
Figure 23
2. Steering wheel
2
m–3259

Advertisement

Table of Contents
loading

This manual is also suitable for:

55073561

Table of Contents