Table of Contents
Advertisement
1
3
7
Figure 24
1. Air cleaner cover
2. Knob
3. Cover nut
4. Cover
4. Loosen the knob on the air cleaner cover and remove
the cover (Fig. 24).
5. Carefully slide the foam element off the paper element
(Fig. 24).
6. Unscrew the cover nut and remove the cover and paper
element (Fig. 24).
Cleaning the Foam Element
1. Wash the foam element in liquid soap and warm water.
2. When the element is clean, rinse it thoroughly.
3. Dry the element by squeezing it in a clean cloth.
4. Put one or two ounces of oil on the element (Fig. 25).
Important
Replace the foam element if it is torn or
worn.
2
4
5
6
8
m–3214
5. Foam element
6. Paper element
7. Rubber seal
8. Air cleaner base
21
1
Figure 25
1. Foam element
5. Squeeze the element to distribute the oil.
Checking the Paper Element
Inspect the element for tears, an oily film, damage to the
rubber seal, excessive dirt, or other damage (Fig. 26). If
any of these conditions exit, replace the filter.
Important
Do not clean the paper element with
pressurized air or liquids, such as solvent, gas, or
kerosene.
2
Figure 26
1. Paper element
2
m–3247
2. Oil
1
m–3248
2. Rubber seal
Advertisement
Table of Contents
