Blade Maintenance - Toro 74603 Operator's Manual

Long Grass
If the grass is ever allowed to grow slightly longer
than normal, or if it contains a high degree of
moisture, raise the cutting height higher than usual
and cut the grass at this setting. Then cut the grass
again using the lower, normal setting.
When Stopping
If the machine's forward motion must be stopped
while mowing, a clump of grass clippings may
drop onto your lawn. To avoid this, move onto a
previously cut area with the blades engaged.
Keep the Underside of the Mower
Clean
Clean clippings and dirt from the underside of the
mower after each use. If grass and dirt build up
inside the mower, cutting quality will eventually
become unsatisfactory.

Blade Maintenance

Maintain a sharp blade throughout the cutting
season because a sharp blade cuts cleanly without
tearing or shredding the grass blades. Tearing and
shredding turns grass brown at the edges, which
slows growth and increases the chance of disease.
Check the cutter blades daily for sharpness, and
for any wear or damage. File down any nicks
and sharpen the blades as necessary. If a blade is
damaged or worn, replace it immediately with a
genuine Toro replacement blade.
Safe Towing Practices
Tow only with a machine that has a hitch designed
for towing. Do not attach towed equipment except
at the hitch point. This product has a limited
towing capacity for small attachments up to 100
lbs (45 kg); such as leaf sweepers and spreaders.
Towing of attachments should be limited to flat
ground. Never allow children or others in or on
towed equipment. On slopes, the weight of towed
equipment may cause a loss of traction and control.
Towing on slopes is not recommended. Travel
slowly and allow extra distance to stop.
20