Toro 74603 Operator's Manual page 10

Table of Contents

Advertisement

107-2474
1. Read the instructions before
servicing or performing
maintenance.
2. Check the tire pressure
every 25 operating hours.
Manufacturer's Mark
1. Indicates the blade is identied as a part from the original
machine manufacturer.
1. Engage
2. Disengage
3. Parking brake
4. Warning—read the Operator's Manual.
5. Warning—before servicing or performing maintenance, read the instructions; set the parking brake, remove the ignition key and
disconnect the spark plug.
6. Cutting/dismemberment hazard, mower blade; entanglement hazard, belt—do not open or remove safety shields while engine is
running.
7. Loss of traction/control hazard, slopes—loss of traction/control on a slope, disengage the blade control switch (PTO), proceed
off the slope slowly.
8. Crushing/dismemberment hazard of bystanders, reversing; crushing/dismemberment hazard of bystanders—do not carry
passengers, look behind and down when reversing.
9. Tipping hazard—do not mow up and down slopes, only mow across slopes less than 15 degrees, avoid sudden and sharp
turns while on slopes.
10. Thrown object hazard—keep bystanders a safe distance from the machine, pick up debris before operating, keep deector in place.
3. Grease every 25 operating
hours.
4. Engine
112-9824
Battery Symbols
Some or all of these symbols are on your battery
1. Explosion hazard
2. No re, open ame, or
smoking.
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection
5. Read the Operator's
Manual.
10
6. Keep bystanders a safe
distance from the battery.
7. Wear eye protection;
explosive gases can cause
blindness and other injuries
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter zx440

Table of Contents