Table of Contents
Advertisement
IMPORTANT
When the phone is ringing, avoid holding the earpiece too close to your ear as it may
damage your hearing.
NOTE
If you have subscribed to your Network's Caller ID service and assigned a VIP Group to
the caller's number, the caller's details are displayed before the phone starts ringing (see
"Store an entry" on page 19 and "Group melody" on page 28). You can set your phone
to give the default ringtone as soon as the call is received then once the caller's identity is
displayed, the assigned ringtone will start. See "First ring" on page 29.
If Auto Pick up mode (see page 29) is on, simply lift up the handset from its base to answer
the call. The default setting is ON. See all "Default settings" on page 36.
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
3.7
Adjust volume
1. During a call, press
shown in the handset display.
3.8
Mute
Mute the microphone so that you can talk to someone else in the room without your caller
hearing you.
1. During a call, press
2. Press
again to turn the microphone back on.
3.9
End a call
>
1. Press
.
After you hang up, the duration the phone is off-hook is displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 30) simply replace the handset on the base to end the call.
The default setting is ON.
3.10
Switch handset on/off
>
1. Press and hold
3.11
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you
to make internal calls, transfer external calls from one handset to another and use the
conference option.
3.11.1 Call another handset
1. Press
.
•
If you have two handsets, the other handset is called automatically.
Using the phone
u
d
or
to adjust the earpiece or hands-free volume. The level is
. The microphone is muted.
to switch the handset on or off.
17
Hide quick links:
Advertisement
Table of Contents
