Specifications - Monoprice 14887 User Manual

Q2: The sound from one of the speakers is louder or quieter than the other speakers in a
constant voltage system.
A2: Check the wattage settings of the affected speaker. If it is higher than that of the
other speakers, it will be louder. Similarly, if it is set to a lower value, it will be quieter
than the other speakers. To get the same volume level, set the switch to the same
wattage setting as is used on the other speakers.
Q3: The sound from all the speakers is scratchy, harsh, or fuzzy sounding.
A3: You are hearing audible distortion, which can cause damage to both the speakers and
the amplifier. Reduce the volume level until distortion can no longer be heard in any
part of the audio signal.

SPECIFICATIONS

Model
Woofer Size
Input
70V Power Taps
100V Power Taps
Transformer Impedance
Frequency Response
SPL (1 watt@1 meter)
Cutout Diameter
Dimensions
Weight
14887
6.5-inches
8 ohms, 70V, or 100V
3, 6, 12.5, 25, and 50 watts
6, 12.5, 25, and 50 watts
1.7k, 700, 400, 200, or 100 ohms
90Hz ~ 20kHz
90dB
ø9.8" (ø250mm)
ø11.0" x 7.5" (ø280 x 190 mm)
6.2 lbs. (2.8kg)
7
14888
4-inches
8 ohms, 70V, or 100V
1.25, 2.5, 5, 10, or 20 watts
2.5, 5, 10, or 20 watts
4k, 2k, 1k, 500, or 240 ohms
110Hz ~ 16kHz
88dB
ø7.1" (ø180mm)
ø8.4" x 5.3" (ø213 x 135 mm)
4.2 lbs. (1.9kg)