Video Capture Mode - Vivitar DVR 794HD User Manual

Video Capture Mode

The Video Capture Mode allows you to capture videos with your digital camcorder.
After turning on your camcorder, the default mode is Video Capture Mode.
TAKING A VIDEO
1. Power On:
Press and hold the POWER button for about 3 seconds to power on the camcorder.
2. Select Video Resolution:
HI FHD (1920 x 1080, 30fps)
LO 720P (1280 x 720, 30fps)
HILO 720P (1280 x 720, 60fps)
 The default mode when the camcorder is powered on is Video Capture Mode – 'HI'
resolution.
 To change the video resolution to 'LO' or 'HILO' press the MODE button until you see
the resolution you would like.
NOTE: The amount of video capture time available as per your memory card size and
selected resolution size appears on the LCD screen.
3. Capture Your Video:
Press the Shutter button to start the video capture.
Press the Shutter button again to stop the video capture.
 During the recording of your video the video icon on the LCD display blinks, the LED
light indicator on the front of the camera flashes and the elapsed time appears on the
LCD.
ATTENTION: Due to limited characters displayed on the screen, video recording
time can be displayed in minimum unit minute.
For example: 0:02 indicates 2 minutes. During recording, 0:01 indicates video recorded
for 1 minute.
 After recording the video, the amount of available time left to capture additional videos
as per your memory card size and selected resolution size appears on the LCD screen.
4. The video is automatically saved to the camcorder's Micro SD Memory card.
16