Using The Flash; Using The Self-Timer - GE G2 User Manual

Using the flash

There are six flash modes. Press the Left/
Flash to cycle through the following flash
modes.
• Auto flash
Camera flash fires automatically based
on existing light conditions.
• Red-eye reduction flash
The camera fires a brief flash before the
picture is taken to reduce red-eye effects.
• Forced flash
Flash always fires.
• Flash off
Flash is turned off.
• Slow Synchro
This allows you to take pictures of people
at night that clearly show both your
subjects and the night time backdrop.
• Red-Eye Reduction+Slow Synchro
Use this mode for slow synchro shots
with red-eye reduction.
Downloaded From camera-usermanual.com General Electric Manuals
Using the self-timer/Multiple shots
To enable the self-timer function, press the
Down/Self-timer to select 2-second timer
delay, 10-second timer delay, or a continuous
shot.
• 2-second timer delay
A single picture is shot 2 seconds after
the shutter button is pressed.
• 10-second timer delay
A single picture is shot 10 seconds after
the shutter button is pressed.
• Continuous shot
Pictures are shot continuously when the
shutter button is pressed based on the
Continuous Shot settings in the menu.
(See "Continuous Shot" on page 56).