Open Flash - GE G100 Power PRO Series User Manual

Open Flash

The Flash is used to illuminate a subject in low light or for fill-
in lighting to achieve better illumination of a subject with
pronounced shadows.
1. To turn on the Flash, press the Flash
2. Press Right button to enter Flash setting menu.
3. Press the Left/Right button to select from the following 6
•
button.
•
•
•
•
•
4. Press the
modes:
Force Off
Flash is turned off.
Flash Auto
Camera flash goes off automatically based on
existing light conditions.
Force Flash
The flash will engage with each shot even if there is
enough available light to take the photo without flash.
Slow Sync.
This allows for night scenery photos that include
people in the foreground. The use of a tripod is
recommended when shooting with this setting.
Slow Sync. + Red-Eye
Using this mode for slow synchro shots with red-eye
reduction.
Red-Eye Reduction
The camera emits a brief pre-flash before the
picture is taken to reduce red-eye effects.
button to confirm the settings and exit the
option.
35 35