Open Flash - GE X400 Power Pro Series User Manual

Open Flash

The flash is used to illuminate a subject in low light or for fill-
in lighting to achieve better illumination of a subject with
pronounced shadows.
1. To turn on the flash, press the flash
2. Press the left button to enter the flash Functions menu.
20 20
3. Press the Left/Right button to select from the following 6
•
button.
•
•
•
•
•
4. Press the
modes:
Flash: Forced off
Flash is turned off.
Flash: Forced Flash
The flash will fire with each shot even if there is enough
available light to take the photo without flash.
Flash: Red-Eye + Slow Synchro
Using this mode for slow synchro shots with red-eye
reduction.
Flash: Slow Synchro
This allows for night scenery photos that include
people in the foreground. The use of a tripod is
recommended when shooting with this setting.
Flash: Red-eye reduction
The camera emits a brief flash before the picture is
taken to reduce red-eye effects.
Flash: Auto
Camera flash goes off automatically based on
existing light conditions.
button to confirm the settings and exit the
option.