Step
Description
11
No parts needed
Key
Operator's Manual
12
Engine Operator's Manual
Parts Catalog
Registration card
Parts needed for this step:
2 Rear Wheels
Installing the Drive Wheels
1. Uncrate mower.
2. Remove wheel nuts from rear wheel hubs.
3. Align holes. Mount drive wheels with the valve stem
to the outside of the traction unit.
4. Secure using wheel nuts provided. Torque to 95 ft-lbs
(128 N M).
Important
Make sure that wheel nuts are torqued to
95 ft–lb (128 N M).
Qty.
Use
Checking the Level of the Mower Deck
2
1
Read before operating machine
1
Read before operating machine
1
1
Fill out and return to Toro
No parts needed for this step.
Checking the Tire Pressure
Check the air pressure in the front and rear tires (Fig. 2).
Pressure: 13 psi (90 kPa)
1. Valve stem
16
1
m–1872
Figure 2