Introduction - Toro 74385 TimeCutter ZS 3200 Operator's Manual

This machine is a ride-on, rotary-blade lawn mower intended
to be used by homeowners in residential applications. It is
primarily designed for cutting grass on well-maintained lawns.
It is not designed for cutting brush, mowing grass and other
growth alongside highways, or for agricultural uses.
This product complies with all relevant European directives,
for details please see the separate product specific Declaration
of Conformity (DOC) sheet.

Introduction

Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
Under the seat
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1
G014523
Figure 1
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol.
This manual uses two other words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved