Table of Contents
Advertisement
6
5
1. Fuel tank cap
2. Fill opening
3. Filler neck
4
G014895
3
Figure 10
1. Fill opening
2. Base of filler neck, DO
NOT FILL PAST HERE
Important: Do Not overfill fuel tank. Fill the
fuel tank to the bottom of the filler neck. The
empty space in the tank allows the fuel to expand.
Overfilling may result in fuel leakage or damage to
the engine or emission system.
3. Install the fuel tank cap securely and tighten until it
"clicks". Wipe up any gasoline that may have spilled.
Checking the Engine Oil Level
Before you start the engine and use the machine, check the oil
level in the engine crankcase; refer to Checking the Oil Level
in the Engine Maintenance section.
1
G014474
Figure 9
4. Base of filler neck, DO
NOT FILL PAST HERE
5. Fuel window
6. Fuel tank
1
3. Fuel
4. Empty space for fuel
expansion.
Starting the Engine
2
1. Sit down on the seat and move the motion controls
3
outward to the park position.
2. Disengage the blades by moving the blade control
switch to Off (Figure 11).
4
1. Control panel
3. Move the throttle lever to Choke before starting a cold
engine (Figure 12).
2
Note: A warm or hot engine may not require choking.
1. Control panel
2. Throttle/choke
lever—choke position
3. Choke
15
Figure 11
2. Blade control switch—Off
position
Figure 12
4. Fast
5. Continuous variable
setting
6. Slow
Advertisement
Table of Contents
