Table Of Contents; Introduction - Toro 79110 Operator's Manual

This product complies with all relevant European
directives. For details, see the separate product specific
Declaration of Conformity (DOC) sheet.

Introduction

This equipment is designed to be part of a riding
lawn mower, which is intended to be used by
residential homeowners. It is designed primarily
for cutting grass on well-maintained lawns on
residential properties. It is not designed for cutting
brush or for agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
© 2009-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Safety and Instructional Decals ............................. 3
Setup............................................................................ 4
1 Preparing the Mower ......................................... 5
2 Installing the Mower .......................................... 5
3 Leveling the Mower from Side to
Side .................................................................. 7
4 Adjusting the Front-to-Rear Blade
Slope ................................................................ 8
5 Removing the Mower....................................... 10
Product Overview ...................................................... 11
Specifications ..................................................... 11
Operation................................................................... 12
Side Discharging or Mulching Grass.................... 12
Using the Blade Control (PTO)........................... 12
Setting the Height-of-Cut ................................... 12
Tips for Mowing Grass....................................... 12
Maintenance............................................................... 14
Recommended Maintenance Schedule(s) ................ 14
Blade Maintenance ................................................. 14
Servicing the Cutting Blade................................. 14
Inspecting the Blade(s) ....................................... 14
Removing the Blade............................................ 14
Sharpening the Blade(s) ...................................... 15
Installing the Blade(s) ......................................... 15
Cleaning ................................................................. 16
Washing the Underside of the Mower .................. 16
Storage....................................................................... 17
Troubleshooting......................................................... 18
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved