Product Overview; Specifications - Toro 79110 Operator's Manual

Figure 20
1. Hairpin cotter and washer
2. Long rod
11. Remove the hairpin cotter and washer at the mower
leveling bracket (Figure 20). Slide the bracket off the
mounting pin. Install the washer and hairpin cotter
for storage.
12. Rotate the leveling bracket up toward the frame, and
hook the long rod into one of the holes to store.
Secure the long rod with the washer and hairpin
cotter.
13. Repeat steps 10 through 12 on the opposite side of
the mower.
14. Move the height-of-cut lever into the D notch and
hook the lift assist spring onto the retaining bolt for
storage (Figure 17).
Note: Do not install the lift assist spring if the rear
tire chains are to be installed.
15. Remove the mower belt from the electric clutch
pulley (Figure 21).
Figure 21
1. Mower belt
16. Turn the front wheels fully to the left. Slide the
mower out to the right to complete removal.
3. Leveling bracket
4. Mower mount
2. Electric clutch pulley

Product Overview

Specifications

Model Weight
79110 104 lb
(47 kg)
11
Length Width Height
55 in 28 in
(140 cm) (71 cm)
10 in
(25 cm)