Fuel System Maintenance; Servicing The Fuel Tank - Toro 30092 Operator's Manual

Commercial walk-behind mower
Hide thumbs Also See for 30092:
Table of Contents

Advertisement

3. Disconnect the wires from the spark plugs
(Figure 31).
Figure 31
1. Spark-plug wire/spark plug
4. Clean around the spark plugs to prevent dirt
from falling into the engine and potentially
causing damage.
5. Remove the spark plugs and the metal washers.
Checking the Spark Plugs
1. Look at the center of the spark plugs
(Figure 32). If you see light brown or gray on
the insulator, the engine is operating properly.
A black coating on the insulator usually means
that the air cleaner is dirty.
2. If needed, clean the spark plug with a wire
brush to remove carbon deposits.
Figure 32
1. Center electrode insulator
2. Side electrode
3. Air gap (not to scale)
Important: Always replace the spark
plugs when it has worn electrodes, an oily
film on it, or has cracks in the porcelain.
3. Check the gap between the center and side
electrodes (Figure 32). Bend the side electrode
(Figure 32) if the gap is not correct.
Installing the Spark Plugs
1. Install the spark plugs and the metal washer.
Ensure that the air gap is set correctly.
2. Tighten the spark plugs to 16 ft-lb (22 N⋅m).
3. Connect the wires to the spark plugs
(Figure 32).
Fuel System
Maintenance

Servicing the Fuel Tank

In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or
explosion from gasoline can burn you and
others and can damage property.
• Drain gasoline from the fuel tank when
the engine is cold. Do this outdoors in
an open area. Wipe up any gasoline that
spills.
• Never smoke when draining gasoline,
and stay away from an open flame or
where a spark may ignite the gasoline
fumes.
Draining the Fuel Tank
1. Park the machine on a level surface, to assure
fuel tank drains completely. Then disengage
the blade control switch (PTO), set the parking
brake, and turn the ignition key to off. Remove
the key.
2. Close the fuel shut off valve at the fuel tank
(Figure 33).
3. Squeeze the ends of the hose clamp together
and slide it up the fuel line away from fuel filter
(Figure 33).
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents