Loose Parts - Toro 38651 Operator's Manual

Setup

Loose Parts

Use the chart below to verify that all parts have been shipped.
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
Description
Handle bolts
Curved washers
Locknuts
No parts required
No parts required
Carriage bolts
Locknuts
Cable tie
No parts required
No parts required
No parts required
No parts required
Qty.
4
4 Install the upper handle.
4
–
Install the wheel clutch cable ends
–
Install the traction control linkage.
2
Install the chute control rod.
2
1 Connect the wire to the headlight.
–
Fill the engine with oil.
–
Check the tire pressure.
–
Check the skids.
–
Check the operation of the traction drive.
6
Use