12
BRAKE SYSTEM
–
Insert the new brake linings, insert pin
Info
Always change the brake linings in pairs.
Make sure that the decoupling plate
the brake lining.
–
Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
102212-10
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
Info
Clean up overflowed or spilt brake fluid immediately with water.
102208-10
, and mount cotter pins
is mounted on the piston side of
.
p. 103)
with membrane
.
and the O-ring.
69