Canon MX390 series Online Manual page 104

Load the original on the platen glass and press the same button (the Color button or the Black button) as
the one which you previously pressed.
Important
When you load the original on the platen glass, move the document cover gently.
Note
When Image quality is set High, or you load the original in the ADF, you cannot add the copying job.
When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
If you press the Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you select Cancel all reserv. then press the OK button, you can cancel
copying all scanned data. If you select Cancel last reserv., then press the OK button, you can cancel
the last copying job.
If you set a document of too many pages to reserve copy, Memory is full may appears on the LCD.
Press the OK button and wait a while, then try copying again.
If Try again appears on the LCD when scanning, press the OK button, then press the Stop button to
cancel copying. After that, copy the documents that have not been finished copying.