Making Copies - Canon MX390 series Online Manual

Making Copies

Load the original to copy.
This section describes the basic procedure to perform standard copying.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Load paper.
Loading Paper
3. Press the COPY button.
The Copy standby screen is displayed.
4. Load the original document on the platen glass or in the ADF.
Loading Originals
5. Confirm the page size and magnification.
1. Magnification
2. Page size
Note
To change or confirm the page size, magnification, or other settings, press the Menu button,
then use the
Setting Items
Press the Stop button to reset the magnification to 100%.
6. Use the (-)
7. Press the Color button for color copying, or the Black button for black & white
copying.
The machine starts copying.
Remove the original on the platen glass or from the document output slot after copying is complete.
Important
If you load the original on the platen glass, do not open the document cover or remove the
original while Scanning.. is displayed on the screen.
If you load the original in the ADF, do not move the original until copying is complete.
Note
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can reserve copy.
button to display the desired setting item.
(+) button or the Numeric buttons to specify the number of copies.