Installing The Micro Sd Card - HIKVISION DS-6102HL User Manual

Portable video recorder

Hide thumbs Also See for DS-6102HL:

Table of Contents

User Manual of Portable Video Recorder

1. Remove the battery

Loosen the 4 set screws on the rear panel of the

device using a straight screwdriver, and then

remove the back cover and battery.

2. Install the SIM card

Carefully slide the SIM card into the SIM card

socket until the card locks into place. Make sure

that the card's gold contacts face into the device

and that the upper-left angled corner of the card is

positioned correctly. The upper one is Main Card

Socket 1 and the lower one is Slave Card Socket 2.

3. Install the antenna

Install the 3G or 4G antenna at the top of the

device if the Slave Card Socket 2 is equipped with a

3G SIM card or the 4G SIM card is adopted.

2.3.3 Installing the Micro SD Card

The device supports 32G memory itself. And you can also extend its storage capacity using a micro secure

digital (SD) card. The SD card socket locates under the rear panel of the device.

Perform the following steps to install the micro SD card:

Table of Contents