Table of Contents
Advertisement
User Manual of Portable Video Recorder
1. Installing the external camera
Align the white arrow on the external camera with
the white label on the device port, and then insert
it.
2. Uninstalling the external camera
Press the root of the interface, lift it up, and pull
out the external camera after the snap joint is
opened.
2.4 Charging the Battery
Use the authentic original Hikvision battery and charger to ensure the safe operations of the device.
Rechargeable Lithium-Ion battery is adopted for the device and you can check the battery level from the
battery icon displayed in the upper-right corner of the screen. When the battery level is lower than 15%,
the status light at the top of the device will turn to red and flash rapidly. Charge the battery timely to
ensure the normal operations of the device.
Pull up the cover on the right-side of the device, and then insert the end of charger into the jack. The
status light is red in the charging process and it will turn to steady green when the battery is fully charged.
2.5 Status Light
The status light at the top indicates the current working status of the device. For details, see the table
below:
Status Light
Red and steady
Green and steady
Red and fast flashing
(200ms open, 100ms close)
Green and normal flashing
(800ms open, 400ms close)
Table 2.2 Status Light Description
Function Description
Battery is charging.
Battery is full.
Device is exceptional (e.g., battery level is lower than 15%).
Network transmission is in process.
Priority
4
4
3
2
14
Advertisement
Table of Contents
