Table of Contents
Advertisement
User Manual of Portable Video Recorder
1)
Input the network SSID and then select the security mode.
2)
Optionally, you can check the checkbox of Show advanced options, and then input to configure
the information including proxy settings, IP address, gateway, etc.
3)
Tap Save to save the settings. The new access point will be displayed on the Wi-Fi networks list.
5. Select the access point on the list, input the password, and then tap the Connect button to connect
the device to the Wi-Fi networks.
You can also check the checkbox of Show password to display the password in plaintext, or check the
checkbox of Show advanced options to configure the proxy settings or IP settings.
6. Tap the connected access point of Wi-Fi networks, and you can view the detailed information of the
access point, including status, signal strength, link speed, and so on. You can tap Forget to disconnect
the device from the Wi-Fi networks.
54
Advertisement
Table of Contents
