Table of Contents
Advertisement
C. Packet Filter
The Packet Filters screen (see Figure 14) allows you to block specific users from accessing the Internet and
you can also disable specific Internet services. There are three different types of filters that may be applied
(MAC Address of the network interface card, IP Address single or range, or TCP/UDP Port). Each filter
can be set to filter (drop) or forward (pass) packets. You can program up to 24 total filters.
Network Adapter Address Filter
IP Address Filter
Single/Range
IP Range
Direction
From Local IP
Innovations in Home Living.
Figure 14
Filter (block) or forward (pass) info from/to local
computer's network adapter MAC address (also
known as the adapter card's Physical Address).
Filter/forward using computer's IP address.
You can filter/forward a single IP, or a range of the
IP addresses.
Enter the Start and End IP addresses for a range of
IP addresses to filter/forward.
To Remote IP
Filtering IP address of a local computer; or filtering
IP address of a remote server (this remote server
connects to the device via Internet).
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
18
©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
www.onqhome.com
Advertisement
Table of Contents
