Static Route Setup - On-Q 364732-01 Owner's Manual

4 port router/switch
Hide thumbs Also See for 364732-01:
Table of Contents

Advertisement

3. Static Mode
For leased line users, information provided by their ISP has to be filled in the below respective fields
when this mode is selected (see Figure 9). Information from your ISP includes: IP address, Subnet
Mask, Gateway, primary DNS and secondary DNS.
NOTE: There may be more than one IP address assigned by your ISP, select one address and enter
its associated information in the corresponding fields.
Device Information
Adapter Address
Device/Computer Name
Domain Name
Innovations in Home Living.
Figure 9
This field is grayed out, because the Adapter
Address is not supposed to be entered randomly. Do
Not alter the content unless you are sure it is
necessary to modify your MAC address. To modify
the address,
check
Modify and enter the desired MAC
address.
Enter a descriptive name for identification purpose.
Some Internet Service Providers (ISP) requires this
information and if that is the case, they will provide
you with the name
For example: yourcompany.com. The maximum
input for this field is 32 alphanumeric characters
and it is case insensitive
301 Fulling Mill Road, Suite G
©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057
www.onqhome.com
(800)-321-2343
10

Advertisement

Table of Contents
loading

Related Products for On-Q 364732-01

Table of Contents