Table of Contents
Advertisement
1. CATV dynamic Mode (Cable Modem)
Selecting this mode (see Figure 7) enables you to obtain dynamic IP address from your ISP via
DHCP support. Once the IP address is obtained, you can access the Internet.
For most cases, this page needs no input. However, some ISPs may require some information for
identification purpose. For example: Device/Computer name and Domain Name; please enter the
information required to complete the settings.
Device Information
Adapter Address
Device/Computer Name
Domain Name
IP Config
DNS Configuration
DNS Server
Innovations in Home Living.
Figure 7
This field is grayed out, because the Adapter Address is not
supposed to be entered randomly. Do Not alter the contents
unless you are sure it is necessary to modify your MAC
address. To modify the address;
check
Modify and enter the desired MAC address.
Enter a descriptive name for identification purpose. Some
Internet Service Providers (ISP) requires this information,
and if that is the case, they will provide you with the name.
For example: yourcompany.com. The maximum input for
this field is 32 alphanumeric characters and it is case
insensitive. Note: 1. Your ISP may ask you to input a
certain domain name. 2. Domain name is also required for
internal network's email and news functions.
This field is grayed out for the IP address is obtained
dynamically
Select Dynamic or Static. Enter the information of Primary
and Secondary DNS Server provided by your ISP when
Static configuration is selected.
301 Fulling Mill Road, Suite G
©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057
www.onqhome.com
(800)-321-2343
7
Check to modify
the MAC address
when necessary.
Advertisement
Table of Contents
