D-Link DSL-2750U Quick Installation Manual page 22

DSL-2750U
8. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router
at the moment) as the MAC address of the WAN interface, click the
Clone MAC Address button (
connected to the router's LAN at the moment, select the relevant value
from the drop-down list (the field will be filled in automatically).
9. For the PPPoE connection type, enter authorization data provided by
your ISP in the PPP section (the username (login) in the Username
field and the password in the Password and Password confirmation
fields). If these data have not been provided by your ISP, select the
Without authorization checkbox.
10. For the Static IP connection type, fill in the IP Address, Netmask,
and Gateway IP address fields in the IP section.
Quick Installation Guide
). To set the address of a device
22