Before Use - Omron MC-509N Instruction Manual

Important: Prior to every measurement, fit a new lens cover on the probe.
Failure to do so may result in incorrect temperature measurement.
For hygienic use, attach a new lens cover each time.
Replace Lens Cover
- Use only Omron
1) Place a lens cover onto storage
case hole with paper side upwards
(plastic side downwards).
3) Completely push the probe
through the lens cover hole.
Please check that the lens cover is fitted firmly (over the Probe Cover Line
on the Probe) before use. If the lens cover becomes damaged, replace
with a new one immediately.

Before Use

® Lens Covers (model MC-509NLC
2) Position the unit vertically and
insert the probe into the
center part of the lens cover.
4) After feeling a slight click,
remove the unit, and the lens
cover will be attached.
6
)