Safety; Sound Pressure; Sound Power; Vibration - Toro Power Max 726 OE Operator's Manual

Safety

Before Operating
Read and understand the contents of this
manual before operating the snowthrower
Become familiar with all controls and know
how to stop the engine quickly
Operator 's
Position
This machine meets or exceeds the ISO standard 8437
in effect at the time of production.
•
Read and understand the contents of the manual before
you start the engine. Make sure everyone using this
product knows how to use the product and understands
the warnings.
•
Do not put hands or feet near moving components on
the machine.
•
Do not operate machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance from the machine.
•
Keep children out of the operating area and under the
watchful care of a responsible adult other than the
operator. Never allow children to operate the machine.
•
Shut the machine off before unclogging, servicing, or
fueling.
Caution: Improper use may result in
loss of fingers, hands, or feet.
.
.
The low-speed auger has a moving pinch
point close to the opening.
3
There is a high-speed
impeller close to the
opening.

Sound Pressure

This machine has a sound pressure level at the operator's ear
of 89 dBA, which includes an Uncertainty Value (K) of 1
dBA. The sound pressure level was determined according to
the procedures outlined in EN ISO 11201.

Sound Power

This machine has a guaranteed sound power level of 103
dBA, which includes an Uncertainty Value (K) of 3.75 dBA.
The sound power level was determined according to the
procedures outlined in EN ISO 3744.

Vibration

Measured vibration level for the left hand = 4.0 m/s
Measured vibration level for the right hand = 3.5 m/s
Uncertainty Value (K) = 2.0 m/s
The measured values were determined according to the
procedures outlined in EN ISO 20643.
2 .
2 .
2
.